Mountain Bike Accessories

Deity Components Deity Racepoint 35 Handlebar: 810mm Width

Deity tunes the wall thicknesses of the handlebar from end to end with no abrupt transitions like traditionally butted handlebars. With damping and compliance qualities just like Deity’s 31.8mm handlebars , and a robust center bore area which provides a boost in torsional stiffness for precision cornering and tracking, the Racepoint handlebar will have you at the sharp end of the results sheet on raceday. Intended use: Enduro and DH

Race Face EXI Crank Bolt Washer

$0.50

RaceFace Crank Arm Fixing Bolts - M15

Hope Hope Caliper Bleed Nipple Rubber Cap

$0.90

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Hope Reservoir Cap Screw Brake Lever

$0.90

Hope Brake Lever Parts

Hope Hope Caliper Bleed Nipple O-Ring 4 x 1.5 mm

$1.30

Replacement piston and seals for Hope disc brake calipers.

Hope 6mm Copper Seal Washer (Bag of 10)

$1.90

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Hope Copper Washer for 5mm or Stainless Line (Bag of 10)

$1.90

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Hope Brass Compression Olive

$2.39

Brass compression olive for Hope hydraulic disc brakes.

Hope Hope Mono M4/V4 Small Caliper Piston Seal, Set of 2

$2.50

Replacement piston and seals for Hope disc brake calipers.

Hope Hope Tech 4 Brake Lever Secondary Piston Seal

$2.50

Hope Brake Lever Parts

Hope Hope V4 Large Caliper Piston Seal, Set of 2

$2.50

Replacement piston and seals for Hope disc brake calipers.

Race Face Alloy Crank Spindle Spacer

$2.51

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

Race Face Chainring Bolt Pack

$2.54

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

Hope Hope X2/09MM4/10 V2 Bleed Nipple

$3.50

Hope Brake Lever Parts

Hope Brass Hydraulic Hose Insert for Braided Hose

$4.28

Brass hose insert for Hope hydraulic disc brakes.

Hope Hope 90 Degree Disc Brake Caliper Connector Bolt

$4.40

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Hope Tech 4 Brake Lever Pivot Bearing

$4.40

Hope Brake Lever Parts

Hope Shroud for Black Brake Line

$4.48

Hope 5mm Standard Hose Kit with Fittings for Hope Brake

Race Face X-Type Spindle Spacer Kit XC/AM Cranks

$4.49

Replacement spindle spacers for Race Face X-Type XC/AM cranksets.

Race Face M15 bolt for 2008+ Evolve and Ride

$4.55

Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.

Race Face Chainring Bolt Pack Set of 4 12.5mm Bolt/Nut

$4.99

Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.

Race Face X-Type Spindle Spacer Kit FR/DH Cranks

$5.39

Replacement spindle spacers for Race Face X-Type FR/DH cranksets.

Race Face EXI Crank Bolt Puller Cap Washer - 2021

$5.99

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

Hope Hope Caliper Seal Kit for X2

$6.30

Recondition your Hope Brake Calipers with a Caliper seal kit. Available in multiple options for a variety of Hope Calipers.

Hope Hope Mono M4/V4 Small Caliper Piston, Set of 2

$7.00

Replacement piston and seals for Hope disc brake calipers.

Hope Hope V4 Large Piston, Each

$7.00

Replacement piston and seals for Hope disc brake calipers.

Race Face Cinch Direct Mount Lockring

$7.65

- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool